Would You Like a Free Expert Consultation?

Las Vegas Handyman 

Not every project goes as well as planned. We would be happy to spend a few minutes answering your questions.

Subscribe by Email

Your email:

Browse by Tag

Pro Handyman Blog

Current Articles | RSS Feed RSS Feed

Installing Screen Mesh


window screensInstalling window screen mesh isn’t difficult, but you need to make sure the window frame (or door frame) isn’t bent. If the screen’s frame is bent, it will be too weak to hold the tension of the screen as it is stretched across the frame. If you use the right material, the job is easy.

Choose the right thickness of window frame. The screen’s frames come in 2 different thicknesses, so measure before you go buy a replacement, or better yet, take a piece of the old frame with you so you can compare the thicknesses. If you are reusing the old frame, make sure it is in good condition.

Most of the screening materials are fabric (rather than the old style metal), and they last long and trim easily with a utility knife. Also get the right size of spline. The spline is the rubbery cord that holds the screening material in the groove. Too fat and it’s too hard to push in…too thin and it won’t hold tension.

Cut the piece of screening so it overlaps the frame by a few inches. Start at a corner and push the spline into the screen until it rests in the groove. A spline roller is best for this as it won’t cut the fabric and you can roll it down the length of spline quickly. When you come to a corner, you may have to tug a little on the screening material and carefully push the spline into the groove, but it is quick. You may also have to cut the screening material at a 45-degree angle outside the frame so that it lays flat and doesn’t wrinkle.

When the entire screen has been rolled, use a utility knife and cut the screening material against the frame.


Currently, there are no comments. Be the first to post one!
Post Comment
Website (optional)

Allowed tags: <a> link, <b> bold, <i> italics