Would You Like a Free Expert Consultation?

Las Vegas Handyman 

Not every project goes as well as planned. We would be happy to spend a few minutes answering your questions.

Subscribe by Email

Your email:

Browse by Tag

Pro Handyman Blog

Current Articles | RSS Feed RSS Feed

How To Fix Your Hot And Cold Reversed Water In 30 Seconds

  
  
  

shower cartridgeThe Hot And Cold Water Is Reversed In My Shower!

This repair makes me giggle. Not because of the repair, but because of the image in the customer's mind. When I get a call like this, I can feel the terror in the customer's voice.

Everyone realizes that this isn't a life-or-death repair...I don't know about you, but I generally stick a body part in the stream of water before I commit with my entire body to be scalded or frozen. So when a customer calls with this problem, it is usually because it has become a nuisance (or their spouse is complaining that it needs to be fixed).

Back to the terror...The customer has visions of cutting open walls, re-piping the house, drywall repairs, and huge invoices.

I ask some questions:

Me: "Is the problem limited to this particular shower?"

Caller: "Yes"

Me: "Does the shower have separate handles for the hot and cold, or is there a single handle that controls both the hot and cold?"

Caller: "A single handle"

Oh goody. I am going to be revered like a rock star when I tell this customer that the problem can be resolved in about 30 seconds and you don't even need to turn off the water to the house to do it.

Behind the handle lies a cartridge with O-rings, washers and the like that turn to allow a mixture of cold and hot water to your desired temperature (it's called a mixing valve). All you need to do is rotate the stem 180-degrees.

You will need to remove the handle to get access to the stem. The handle will have a cap on it that you can pop off with a small screwdriver, or it wall be attached with a set screw near the underside of the handle. With the cap off, remove the screw that holds the handle to the stem. Once you pull off the handle, the stem is right in front of you...it is the piece that the handle screws into. Just turn it 180-degrees (you can do it with your fingers) and screw the handle back on.

All Posts